About Puneet Bansal

Puneet Bansal · 08-25-2014

Hi ,Hi ,Can i use HP controller ( HP ProCurve MSM760 Controller ) for Cisco LAP (AIR-CAP3602I-N-K9) over internet ?I am checking that Cisco LAP try to find CISCO-CAPWAP-CONTROLLER which seems to be cisco proprietary.Please suggest .ThanksPuneet Bansa...

Hi Maghesh, · 11-18-2015

Hi Maghesh, You can change and hard core the switch role by chnaging the priority , as below. switch 1 priority 15 switch 2 priority 10 Thanks Puneet Banal

Puneet Bansal · 08-25-2014

Thanks Sandeep, do we have document on Cisco which we can show to end user. RegardsPuneet Bansal

Puneet Bansal · 10-26-2010

Hi PankajCould you provide some more information like show ver, show stack from the master switch in the stack.The maximum number of switch can be 9 (numbering 1, 2---9) in the switch so that should work.The stack is numbered by two way1 Up time2 Low...

Puneet Bansal · 10-25-2010

Hi You can directly upgrade.Just check the memory requirements. Also as per the Show tech (Show Logging) you HSRP is not working properly - fluctuating) Just upgrade the IOS and then check. RegardsPuneet Bansal

Puneet Bansal · 10-23-2010

Hi1st try to use the command show flash , check what it is showing .As some time the flash also goes bad and you can not write any thing on that .RegardsPuneet Bansal

Member Since	‎10-23-2010 06:30 AM
Date Last Visited	‎03-21-2018 11:32 PM
Posts	6

User Statistics

User Activity

Cisco LAP (AIR-CAP3602I-N-K9) with HP controller ( HP ProCurve MSM760 Controller )

Hi Maghesh,

Thanks Sandeep, do we have

Re: Catalyst 3750 stack issues

Re: experiencing high CPU on both the core switch-6509 .

Re: It can not save config