Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When I tested a switch through the web interface of CDM certain ports showed no activity or packet transfer (no clear counters either) yet when I put a Fluke tester on one port that had no activity a link light came up and a ping was successful any i...
Is there any way to determine who has accessed a switch using HTTP. The reason I ask is that I have setup access for some of my team members, and one of them deliberately (yup it's true) disabled all the switch ports, including the uplink ports to ou...
I apologise in advance for my stupidity.We have What's up Gold running on a windows server, and I am trying to get SNMP traps sent to it. I have enabled snmp on a switch and set the string to RW. I have also done the following 'snmp-server host 192.1...
Folks, I have been hit by an absolute beauty by our management today. We have a Joint project team who are on our network, but connecting back to another company via VPN. They are complaining that the link speed is to slow (we only have 4meg for the ...
I am wondering if it is possible to assign a DHCP address range from the last switch only on a 3 switched stack, and how to do it ?. The reason I ask is that we want to VLAN off the third switch for a certain department and isolate them as much as po...
Thanks for that Glen. Strange thing is I traced the port back to the socket in question and a pc was plugged in and working on it, this is only happening on certain ports see the stats -Confused ?, I am.4TH_ENG_EXP_A#show int4TH_ENG_EXP_A#show interf...
Thank you my friend, What's up gold has discovered the devices, andI have now input the command you suggested, I will report back on whether it works now or not.Once again Thanks.
Thanks for that link. As it turns out, it is almost impossible to do this as we end up hitting ourISP's router. I could put QOS on the VPN connection, but once again once it hits the bottleneck of the ISP router that slows it down again. What I am go...
Cheers for the help Aaron and Andy, the IOS version on the new 24 port switch is 12.2 (35) the existing 48 port ones are 12.2 (25). The stack cables are copied from an existing working 3 stack setup funnily enough two 48 porters and the 3rd a 24 port...
