hi guys, I have to choose server farm switch but i dont have enough experince for that. My environment : 10 servers in VCenter cluster, brocade SAN switch for storage Tech spec:- 10G- standart L3 switch- non stoping Upgrade- may be MPLS for connect D...
Hi guys!! I got issue about packet loss in GRE tunnel between BRANCH (CISCO3825) and HEAD (CISCO3845-MB) I'm measure bandwidth between HEAD and BRANCH offices with iperf3 Tunnel2direction at HEAD without question - 5Mb/sdirection at BRANCH have Pa...
Hi guys!please do consider my topology: map-1.png And my issue:On Branch Router's i have output of command:#sh ip route 0.0.0.0
Routing entry for 0.0.0.0/0, supernet
Known via "ospf 10", distance 110, metric 1, candidate default path
Tag 10, t...
Yeah, we did check its first, but trouble only if traffic going via tunnel. If we pushing traffic without GRE every that work well output sh int fa0/0/0FastEthernet0/0/0 is up, line protocol is up
Hardware is FastEthernet, address is c84c.7511.111...
Hi Georg! Sorry for my late answer. Im tried your suggestion but unfortunately it didn't help. We will be change our circuit for workaround it is trouble. Thanks for you reply!
@kstatinet wrote:privet, ivan sorry, if this not really answering your question.. did you already check on that router with the following command#show ip ospf interface briefthe second column 'PID' should list PID 10 that corresponds to tag 10? yes, ...