Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Firstly here is some background of our deployment. We have installed several Cisco 2800 APs in an RTLS deployment on 5520 APs code 8.3.143. As expected we are having poor performance on 2.4ghz radios due to too many APs in a given area. We are in the...
e are using 2802I APs and I need to know the recommended maximum number of clients per AP or per Radio, not the supported 200 max clients per AP. I have seen lots of recommendations saying that 20-25 clients is ideal, I am not sure how accurate this ...
Thank you. I really don't want to do everything statically. I have no problems using RF profiles to help with power settings etc I just feel that making everything static will mean that if we get any wireless interference from neighbouring companies ...
Thank you. Yes we had a site survey completed using Ekahau. We were advised that due to the number of APs in close proximity to each other we would need to disable some of the 2.4 radios. We only planned to use FRA in manual mode so that we use its s...
Thanks Raffy, We have had a site survey completed whereby we were very clear with our requirements including client density in meeting rooms. However, the outcome was less than satisfactory and we have providing them with more recommendations and bes...
