Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello
I configured clientless VPN on ASA5540 and it works with http, but not https websites. https://web.telegram.org is one of them.
ASA Version: 9.1(7)
Regards
Yashar
Hello everybody
I have ASA 5540 and its configured for VPN over SSL only. it has been working for 2 years smooth, but since 3 days ago something weird is happening on most of my ios clients who are using cisco anyconnect on their IPhone and IPad. ...
Hi
I have an ASA 5540 as you see the device information in the below :
ASA Version : 9.1(7)
ASDM Version : 7.5(1)112
Total Flash : 256 MB
Total Memo : 2048 MB
only Anyconnect SSL VPN service is running on the ASA.
Problem :
clients loose access to...
Hello,I am trying to configure ASA to accept IPSec VPN from Mikrotik. As I have seached there are many tutorials for Site to Site VPN between Mikrotik and ASA and I couldn't find any guid for IPSec client from Mikrotik OS. kindly share with me if any...
Hello Everybody, I have a strange issue with Telenet setting on ASA5540 with ASA Version 9.1.7 . kindly help me if you have had same issue before and fixed it.------- here is what I have done with Telnet Setting. aaa authentication telnet console LOC...
Hello All
I have fixed the problem. I was changing the ports though the wizard and it was not working, but I went through command line, and its working now.
webvpn no enable outside port 800 enable outside anyconnect enable tunnel-grou...
Dear Martin,
Yes, its for IPSec and because of that I have created IPSec profile and GP related to it with a tunnel type of IPSec , l2tp/IPSec.
as I monitored Radius Server ( accounting ) here is the debug log :
User-Name = "aliyashar" User-Pas...
Dear Martin
I have set the GP on SSL and L2TP/IPSec tunnel only.
lets check again , maybe the way I have set port number is not correct. could you please let me know how should I set port number for authentication ( ex: srv.myvipport.com:800) ? I ...
I debugged radius packets on Billing server and saw the ASA is sending username and password, but instead of password, username again.totally confused, same radius setting is working fine current profile which is set with srv.mydomain.com
Dear Martin
Port #443 is blocked by provider ( as I found out ) to solving this problem :
1- I have changed " IPSec Client Service Port " port from 443 to any other numbers (ex: 999)
2- in Anyconnect setting I changed server address from srv.mydom...
