HiI'm running IOS Version 12.1(11b)E4 on Cat 6500. How do I configure port mirror. Any pointer/url is appreciated.

Hi All My apologies if I’m posted the question to the wrong group.Anyway, the show load of my CSS 11500 (ver 5.03) is as below. Does it mean the load is not balance between TSM1, TSM2, TSM3 and TSM4CSSLeft# sh loadGlobal load information:Enabled S...

Hi AllI’m configuring wccp ver 2 at cat 6513 and the Network Appliance is the Cache Server. The following have been configured:ip wccp version 2ip wccp 1interface vlan11 ip wccp 1 redirect outThe following is the show commands:Catalyst_6513_A#sh ip ...

Hi AllMy customer is running IOS ver 12.2 on his 2620 for Internet Connection with WIC-2T installed. The ISP has given them 2Mbps leased line. The following has configured on the serial interface:interface Serial0/0 bandwidth 2048 ip address 210.187....

I’m performing Cat 6513 Sup2 (WS-X6K-S2U-MSFC2) redundancy test. The failover between the active and standby are perfectly working. However, the 2 X GE port parameters are missing from the configuration and changed to shutdown status when I put the ...