Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have one of these and I'm needing to set it up to use our dhcp server and authenticate off an IAS Radius server.Can anyone provide some direction? I have it in default mode.Our local network 10.10.50.0 and our VPN is 10.10.20.0 on a Cisco ASA 5210...
Hello,I've spent hours trying to make heads or tails of the example: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtmlXX for privacyAny direction would be greatly appreciated.satx-mdf-fw1(confi...
We have an Ethernet Circuit from TWC Telecom (no router provided, simply an ethernet port 100mb pipe)We have a Cisco ASA 5510 4 ports. Do we need a router is question? If not how would one configure this? I'm confused because we have it working but ...
OK, getting closer. It seems the groups added on the IAS were not correct. I added Domain Users and Domain Computers. Now our laptops are logging on with no Authentiation needed (not sure if that good).Any ideas as to what is causing these KEY_MGM...
I'm assuming that EAP-PEAP is what would be best practice in this case considering we are using Microsoft AD accounts and IAS Radius as the athentication server.Here is reference: http://articles.techrepublic.com.com/5100-10878_11-6148579.htmlBelow i...
Thank you Surendra, that was extremely helpful.I've upgraded and at the latest IOS version. We are able to see the WAP and get prompted for uname and pass but still can't authenticate.I have added EAP to the IAS Radius server policy however am getti...
Ok, I did the following:1.) executed:tunnel-group vpn general-attributes authentication-server-group (inside) vpn2.) I added a user to local db.3.) executed:tunnel-group DefaultRAGroup general-attributes no authentication-server-group (out...
Thanks for the tip, http outside turned off now!Looks like I've got some more noodling to do, don't recall how to setup a local database. Its been almost 10 years since I've configured a pix, beleive or not I used to work for Cisco in Austin in QA s...
