Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Scenario:a) 1xleased line to ISP.b) as initial LAN range provided is too small, a second subnet is given on the same link by the same ISP.c) this means the both subnet A and subnet B is able to route out to the Internet via the same router althou...
Hi all,I have private point 2 point network, simply HQ and remote site scenario. I have this problem of remote site workstations not able to access servers (eg. not able to ping) located at HQ which the servers default gw are pointing to the pix. How...
Hi,encounter problems on accessing the router via telnet from Internet when NAT is applied to the WAN interface of the router. The access-list that tied to the NAT statement has already permit all traffic to pass thru. I have tried adding the command...
Does the voice ports on Cisco 827-4V support analog phones? If possible, can some pls kindly advise on some sample script? Had a hard time finding related information....
Yup, the HQ router and Pix are in the same subnet and HQ router's default route points to the pix.I recalled the debug statement captured to be like "deny icmp src dest ....[no xlate]"I have already had a similar acl applied at the outside interfac...
from remote lan-->last hop is at HQ_PN routerfrom HQ lan-->dropped at first hop which is supposedly the pixi did advise to use the route add statement but however the server farm has a mixture of mainframe, novell, windows...though most of them work ...
yes, and also a route inside statement "route inside 192.168.2.0 255.255.255.0 " in the pix. without the "route inside" statement, the remote site lan workstations will not be able to access Internet via HQ at all.
