Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. I'm attempting to create an ipsec tunnel from an ASA5510 running 7.2 to a watchguard t-30W at a remote branch office with a dynamic wan I've configured dyndns, and the options for the watchguard's phase 1 identification are limited to using do...
I've had a very hard time getting any traction on this in the month I've been working with TAC on the hundreds of impact red, priority 1 alerts we've been getting because of this. I've only gotten to the point where they've confirmed with Talos that ...
Hello,
I tried to address this by doublechecking MTU, QoS etc, but I ended up fixing this and using the Solar WInds TFTP Server successfully by configuring the timeout from 3>10 seconds @ File>Configure>TFTP Configuration.
Hello Philip.
Thanks for your help. When specifying IP, it's still identified as tunnel group (defaultRAgroup) when I use aggressive mode on the watchguard (and defaultl2lgroup when I use main mode) for phase 1 settings. Defaultl2lgroup would seem l...
