Site connectivity is as follows.distributing ospf routes into bgp and bgp routes into ospfI've implemented prefix-lists to filter out networks. It's working when using /24 statements. ip prefix-list OSPFtoBGP seq 5 permit 10.1.2.0/24ip prefix-list O...
Figured it out. I was hitting he max prefix limit set by the Provider on their Edge router. Took them 3 days to respond to my open support request.http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008010a28a.shtml
Care to elaborate? 1 router has OSPF running, 1 router has BGP running. The Data Center switch is running BGP and OSPF. All 3 devices are local. No GRE.
thanks for testing in a different environment. I don't know what the problem is.I added the network statements so that I could keep track of what networks are behind which routers. My topology was only summarized as these 3 sites are the only ones ...
SITE A is connected to SITE B by Provider A using BGPSITE C is connected to SITE B by Provider B using OSPFI have OSPF & BGP configured on the core switch at Site B. OSPF & BGP Config.router ospf 100 log-adjacency-changes redistribute bgp 65534 subne...
Sorry, I clarified what it is I'm trying to do. Instead of adding 10.7.4.0/24, 10.7.8.0/24, etc for every network in the 10.7.0.0/16 space, I would just like to add 1 line that would cover the whole network instead of the individual entries. But wh...
