Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Preciso de um help, segui o doc Deployment Guide Cisco TelePresence MCU para utilizar a MCU como Midia Resource (Deploying an MCU as a Unified CM media resource Pag.30) mas não obtive sucesso.
Dear Colleagues, Recently, I upgrade a 7.0 Cluster from MCS to CUCM 8.6 in UCS environment. I used a LAB MCS to go from 7.x to 8.0 and then to 8.6.The installation was sucessfully done and also the restore of 7.x data. So I have all of my IP Phones ...
Dear Colleagues, I am facing some problems to get the secondary dialtone for PSTN calls on my IP Phones. I am running CUCM version: 8.0.3.24049-1In Brazil, all external calls starts with 0 and the costumer needs to get the secondary dialtone after th...
Hi Folks, Sorry for delay to post some news about this case. I solve my problem, but was nothing related to the CUCM. My problem was related to LAN Switching. There was connectivity between all vlans, but a particular vrf was blocking the tftp traffi...
Matt, Thanks, but I put a new phone in a new vlan with just the new TFTP option, but is not working. Seems to be a bug problem, but I am tryng to research something around that.Luiz
After further investigation, I foune just one RP (Route-Pattern) from more than 2000 routes on the cluster. This route wasnt check with provide outside dialtone and starting with 0.XXXThe problem was impacting in all phone, because this RP was instal...
