Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Glad to help. The user guide does not mention a way to configure an enable password, but the 'system support diagnostic-cli' command actually opens a console session to the lina CLI. The first time this is entered, it will start you off in user exec ...
Hello, If you are wanting to send the Connection Events to an external syslog server, here are the steps to follow: 1) Create an alert under Policies > Actions > Alerts with the type of 'syslog'. Facility and Severity can be left at default.2) Within...
Hi Andy, The concept of an enable password does not exist on the FTD platform as it does on other Cisco platforms. Here is an excerpt from the FTD Command Reference Guide, which explains why this is so: Privileged EXEC Mode. Enter the enable command ...
Hello, The Intelligent Platform Management Interface (IPMI) daemon communicates with the component which is used for Lights Out Management (LOM). It is a separate board which remains on even when the chassis is shut down. Maybe that component went ba...
Hello, Unfortunately, the FMC does not support a manual upload of users as it needs to be able to communicate with a user database and an identity source. In order to use users in the Access Control Policy rules, these things need to happen: 1) FMC n...
