Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is anyone here using group policies to set different VLAN tags, per client, on the same SSID? For example, I have the following:ssid: foossid access control vlan tag configured: 105mode: bridgedauth: basic psk wpa2vlan 105 network: 192.168.5.0/24vlan...
Has anyone else tested an MX85 and actually reached the stated 1gbps performance through it? I received mine yesterday, it's running 16.11, and I can only get 700mbps through it. I'm testing internal-to-internal only flows, VLAN to VLAN, to rule out ...
I'd like to create a traffic shaping rule on my MX67 that matches all traffic not matched by the higher priority rules. Is there a particular syntax to match everything? I can't seem to figure it out.
What is everyone doing from a combined/separate network perspective? I just started out with a full Meraki stack, MX, MS, and MR, so I started with a combined network. However, it seems that within a combined network I only have one chance to apply a...
Did you ever find a fix for this? I've run into this several times now on my MR44 while running MR versions 32. I tried this on the beta a while back, had the problem, and moved back to MR31. Now that I'm back on MR32 the issue is happening again.
I disagree that clients on the same SSID will all see the same BC/MC traffic, regardless of the VLAN they’re assigned to. That’s broken. If I assign a client to a particular VLAN they should see link local multicast from only that VLAN.I decided to t...
I did a little more investigation here. It would seem that the MR44 is leaking both ipv4 and ipv6 multicast packets sent on the base SSID access controlled VLAN (the default vlan), to clients in other VLANs if those VLANs are assigned via group polic...
For the sake of thoroughness I ran some additional numbers on the passthrough test case.Test client: 2018 Macbook Pro, MacOS 11.6, Safari 15.0.I am testing using fast.com My fast.com settings are:Connections: 8 min, 16 maxDuration: 15 sec min, 30 sec...
