Debe ser un usuario registrado para añadir un comentario aquí. Si ya está registrado, inicie sesión. Si todavía no está registrado, hágalo e inicie sesión.
Como puedo obtener la IP de un equipo que está en un puerto, trato de rastrearla mediante su MAC pero no me arroja nada usando el comando sh mac addres-table dynamic int eth1/8 que puedo hacer, ya con su MAC puedo buscar su IP con SH ARP no?
Hi all!I have a switch model C9300-48UXM, within my configuration in the SVI 100.I need to set the bandwidth limit to 2 Mb. when creating the class-map and policy-map: class-map match-all VLAN_100|2MBPS
match vlan 100
!
!
policy-map VLAN_100|2MBPS
cl...
ver más
Buenos días, voy a intentar explicar mi problema, por si me pueden ayudar, gracias por adelantado.La estructura de red es la siguiente, tenemos un 3 Sw:SW_TR capa 3SW_TR_2 capa 2SW_SALIDA Tengo problemas de conectividad con la red 10.x.x.x solo desde...
ver más
Estimados muy buenos días, quiero hacer una pregunta para resolver un problema, que de seguro es muy sencillo, pero no he logrado dar con la solución.El tema es que sobre un router tengo configurada en la int f0/0 la ip 172.16.1.0/24 y sobre la int f0/1 l...
ver más
Friends, good afternoon: Please, a question, I have a SW IE4000, model 8GS4G, in the Gigabit ports I have placed GLC-FE100X SFP modules, and the ports by port configuration I have put them at 100Mbps, I ask, if it can be given connectivity through these p...
ver más