Hi,
Is there anyone can advise the Avaya IP 9608 phone switch port configuration with Cisco switch?
Can I configure it as below:
switchport access vlan XX
switchport mode access
switchport voice vlan XX
srr-queue bandwidth share 10 10 60 20
priority-queue out
mls qos trust cos
auto qos voip trust
no cdp enable
no cdp tlv server-location
no cdp tlv app
spanning-tree portfast
or
switchport trunk native vlan x
switchport trunk allowed vlan x,x,x,x
switchport mode trunk
srr-queue bandwidth share 10 10 60 20
priority-queue out
mls qos trust cos
auto qos voip trust
no cdp enable
no cdp tlv server-location
no cdp tlv app
spanning-tree portfast
What is the recommended configuration in this?