em 11-08-2012 08:08 AM
While on vacation i had a coworker move my CUCM server from a physical server to a Virtual Server. He added the hard drives to a virtual server (so the data is gone). i have rebuilt the CUCM Publisher but i do not have a backup. What i need to know is if there is a way to migrate the configuration data from the CUCM subscribers back to the CUCM Publisher. I am running CUCM 8.6.2. Any help is appreciated.
thanks
Dennis
Solucionado! Ir para a Solução.
em 05-27-2014 04:38 PM
Dennis,
I had a similar situation at work today with a customer. I think the following document will work for you:
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/116946-technote-product-00.html
Make sure you follow it to the letter as the success of the procedure depends on that.
Hope this information helps,
Marco Rojas
em 12-13-2012 03:45 AM
Hi Dennis,
If you have no backup point it is difficult to do anything. At least one backup or extraction settings via csv file would help you.
best regards,
Daniel
em 05-27-2014 04:38 PM
Dennis,
I had a similar situation at work today with a customer. I think the following document will work for you:
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/116946-technote-product-00.html
Make sure you follow it to the letter as the success of the procedure depends on that.
Hope this information helps,
Marco Rojas
Descubra e salve suas ideias favoritas. Volte para ver respostas de especialistas, passo a passo, tópicos recentes e muito mais.
Novo por aqui? Comece com estas dicas. Como usar a Comunidade Guia do novo membro
Navegue pelos links rápidos da Comunidade e usufrua de um conteúdo personalizado e em seu idioma nativo: