em 04-01-2019 05:48 AM
My client has a problem with the router model 2901, it has a high CPU.
Firmware used is flash0?c2900-universal9-mz.SPA.151-4.M7.bin
100% CPU
The process that most has eh the CCH323_CT
What do I do ?
Solucionado! Ir para a Solução.
em 04-08-2019 04:51 AM
I solve my problem change the protocol H323 to SIP.
em 04-01-2019 07:11 AM
Hi @Alexandre11
Review this discussion of the community with a similar theme:
https://community.cisco.com/t5/switching/high-cpu-usage-on-2960-x/m-p/3319590
Regards
em 04-01-2019 07:43 AM
but this is about router 2901 and not about switch 2960
The problem is another.
164 2845488462 335832663 8472 18.73% 18.08% 19.58% 0 Hulc LED Process
The setting is also different
In configuration mode: sdm prefer lanbase-default
em 04-05-2019 04:57 AM
I updated the equipment but it did not solve.
em 04-05-2019 05:37 AM
em 04-08-2019 04:51 AM
I solve my problem change the protocol H323 to SIP.
Descubra e salve suas ideias favoritas. Volte para ver respostas de especialistas, passo a passo, tópicos recentes e muito mais.
Novo por aqui? Comece com estas dicas. Como usar a Comunidade Guia do novo membro
Navegue pelos links rápidos da Comunidade e usufrua de um conteúdo personalizado e em seu idioma nativo: