Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Catalyst Center is unable to provision the Controller and the wireless aps. I ran the telemetry check for the wireless controller, and it showed a problem with the secondary ISE"Cisco ISE server certificate has expired or not yet valid "And because o...
Customer has an internal nat ip 10.130.32.117 and external ip 177.124.177.69 and wants to access from inside the vpn 10.130.32.117 through external ip 177.124.177.69 on port 1826He gets the error below:Last login: Mon Jul 18 13:33:55 2022 from 10.100...
I am trying to enable flexconnect on vWLC I already did the configuration but when I connect to the SSID it is not taking ip.The settings made were: In the acess-point: In the WLAN: Please, What did I do wrong ? or what's missing?
AP 1852 does not join vWLC virtual controllers I installed 2 new virtual controllers vWLC version 8.5.161. and configured the mobility group, activated Ap Fallback among othersetc.I'm trying to upload an AP model 1852 AIR-AP1852I-Z-K9 that is in vers...
Cliente tem problemas ao ligar uma fibra com GBICs de 10GB entre um switch cisco WS-C4503-E ao um switch dell modelo S4128F-0N no switch cisco a fibra é conectada no modulo WS-X45-SUP7L-E esse módulo tem com 4 portas SFP.Cliente testou testou na prim...
I did this, but i have error in ise yet then, I need did this to solve this problem:run the commandapplication configure iseon bothon the PPANrun[20]Reset Context Visibilityywaitdon't type anythingon the SPAN[20]Reset Context VisibilityAfter he finis...
We attempted to reinstall the certificate via the GUI and CLI, without success.The solution was to reset the secondary ISE settings and configure it from scratch.app reset-config iseyes to confirmand back up the primary ISE so it could be imported in...
