Adding/Applying Cisco AnyConnect Plus licenses to an ASA 1010

[MSOAdmin]

I'm trying to setup a brand new ASA 1010 with the ASA image. Routing and ACLs work just like they used to but the Smart Licensing is tripping me up. I'll admit I'm new to Smart Licensing but I got the device registered and applied the Standard license as well as the free 3DES license. 

What I can't figure out is how to apply the 25 Cisco AnyConnect Plus licenses. Its probably something really simple but I'm just not seeing it. My Smart Licensing dashboard shows I have 25 AnyConnect licenses but 0 are in use (+25 Balance). What am I missing? 

[Milos_Jovanovic]

HI @MSOAdmin,

You do not enable AnyConnect license directly on FPR1010 running ASA image. If you check 'show version', you'll notice that AnyConnect is already enabled. You are required to purchase license still, but, in this case, it will come as right to use.

You only license Standard, StrongEncryption and SecurityPlus features.

You can find this information in Getting Started Guide.

BR,

Milos