09-27-2012 08:55 AM - edited 02-21-2020 06:21 PM
Hi all,
I need you support regarding my configuration attached.
My question is why using AnyConnect I can't make the autentication.
Consider that:
1. Cisco AnyConnect work properly with LOCAL user
2. test aaa-server authentication GOADC host 192.168.99.1 username ... password ....
return:
INFO: Attempting Authentication test to IP address <192.168.99.1> (timeout: 22 seconds)
INFO: Authentication Successful
Let me know what missing.
Thank's in advance
Best Regard
Solved! Go to Solution.
09-27-2012 10:18 AM
Hi Parker,
According to your configuration you are using the DefaultWebVPNGroup.
So, for this to work, do the following:
tunnel-group DefaultWebVPNGroup general-attributes
authentication-server-group GOADC
!
Let me know how it goes.
Thanks.
Portu.
Please rate any helpful posts
09-27-2012 10:18 AM
Hi Parker,
According to your configuration you are using the DefaultWebVPNGroup.
So, for this to work, do the following:
tunnel-group DefaultWebVPNGroup general-attributes
authentication-server-group GOADC
!
Let me know how it goes.
Thanks.
Portu.
Please rate any helpful posts
09-28-2012 09:05 AM
Seems ok,
now login is successfully autenticated... I have to check with the Active Directory administrator.
Thanks a lot.
Bye
09-28-2012 10:03 AM
Awesome!
Hope you have an amazing weekend
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide