I have a group of users at a remote site who use the AnyConnect SSL VPN client over a DSL line. However, they now want to share an ethernet-attached Xerox Workcentre 5775 printer. The printer is a sophisticated multi-functional device which can scan into a shared drive back at HQ. It also needs to be supported by our helpdesk who are back at HQ, and need access into the box.
Is there any way that I can connect the printer to the network with a hardware client? I remember that there was a hardware box for the VPN 3000 series that did this. Presumably a low end router might do the trick.
Has anyone had any experience with split tunnelling to Xerox printers - if so, please can you share the config!
The VPN3k platform is EOL so I wouldn't steer you in that direction. For always-on network connectivity, you can look at implementing an 800 series router or an ASA5505. You can then look into an IPSec solution such as EasyVPN to connect the spoke back to your head end router or ASA. Depending on the number of endpoints at this location, you can connect the PCs/printer directly to the available switchports on these hardware platforms or connect a separate switch behind.
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to leverage Microsoft Single Sign-On for multiple ISE Portals (for example Sponsor and Guest/BYOD Portals).
At the time of this writing, ISE cann...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure AD credentials.
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...