Hello all,
Not posted here in a while but thought you guys might be able to help me out with a little problem. Okay, I have a Cisco ASA5505 running the latest asdm and ios...
[I]Cisco Adaptive Security Appliance Software Version 8.4(2)
Device Manager Version 6.4(5)206[/I]
I am trying to get basic web resolution and access but not having any luck. I just wanted to know if there is anything special that I needed to do with the ASA before I can do this. I've made a quick visio diagram of the network, see below:
[URL=http://imageshack.us/photo/my-images/4/diag.png/][IMG]http://img4.imageshack.us/img4/94/diag.th.png[/IMG][/URL]
The Vigor has a local subnet of 192.168.0.x/24 however there is also a "For routing use only" option. See below:
[URL=http://imageshack.us/photo/my-images/717/diag2.png/][IMG]http://img717.imageshack.us/img717/9131/diag2.th.png[/IMG][/URL]
I'm hopeful that by configuring the "For routing use ip address" as one of my allocation of public ip's, that it should work okay. I can actually ping by IP and name from the interface of the ASA but can't do that or browse to websites from clients which have their default gateway set to 192.168.0.252.
I was under the assumption web browsing should work out of the box almost as it's treated as an outgoing connection. Here is my config for you to look at:
(note, I've tried to set the route outside to the local ip of the draytek and also the "For routing usage only" IP address)
ASA Version 8.4(2)
!
hostname gilwoodasa
domain-name gilwood.local
enable password 9PvFytIZ2Vpy8Gon encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.252 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 82.70.231.xx 255.255.255.248
!
interface Vlan5
no nameif
security-level 50
ip address dhcp
!
boot system disk0:/asa842-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 208.67.222.222
name-server 192.168.0.3
domain-name xxxxxxxxx
object-group network obj_any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
asdm image disk0:/asdm-645-206.bin
no asdm history enable
arp timeout 14400
!
nat (inside,outside) after-auto source dynamic any interface
route outside 0.0.0.0 0.0.0.0 82.70.231.49 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
telnet timeout 5
ssh 192.168.0.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption 3des-sha1 des-sha1 rc4-md5 aes128-sha1 aes256-sha1
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http [url]https://tools.cisco.com/its/service/oddce/services/DDCEService[/url]
destination address email [email]callhome@cisco.com[/email]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4c06870d7d65d349cb63bd8044d61b35
: end
So, if you're still reading this - all I am after is a way to get basic web browsing working. Here are the logs which show the attempted web access...
[URL=http://imageshack.us/photo/my-images/338/logsi.png/][IMG]http://img338.imageshack.us/img338/671/logsi.th.png[/IMG][/URL]
Big thank you in advance!
