Cisco VPN Client

[pvh-cisco]

Is it true that the PIX will drop a client if someone from the same IP address (Firewall NATing)initiates a connection ? If so why ?

I have the PIX set up with an IP Pool of 10 IP's but the only way I can have multiple clients connect simultaneoulsy is if they oribinate from different IPs.

[jmia]

Joseph,

Try enabling : in config mode: isakmp nat-traversal

on your pix and see if this resolves your problem.

Pls rate all posts.

[pvh-cisco]

That did the trick...Thanks

[pabelanger]

Right on, just the fix I was looking for.

PB