How can i assign static fixed IPs to Remote access VPN users

[shanilkumar2003]

Hi Team,

I have a requirement to assign static fixed IPs to remote access VPN users in ASA, please help how can i achice this

Thanks in Advance
Shanil

[Leo Laohoo]

Duplicate post #1.

[shanilkumar2003]

Dear Leo

i have changed the duplicate topic please help

Thanks

Shanil

[Andrew Phirsov · Accepted solution]

username user1 attributes

vpn-framed-ip-address 10.200.115.78 255.255.0.0

[shanilkumar2003]

Thanks Andrew..This works well

Thanks

Shanil

[atcompussupport]

Sorry for bumping old thread, i have similar problem. 

I have configured vpn-framed-ip-address for all users, but ASA5510 (9.1.3) still uses group policy address pool instead of static user IP for VPN users (ipsec, anyconnect). I do not understad that, can anyone help? (I do no use, radius or ldap.)

Thanks.

[Andrew Phirsov]

Hi,

does the framed IP belong to the pool, assigned to group policy?

Maybe, if it is, address is already being occupied by some other user, so assignment doesn't take place for the framed user. If so, just put the framed ip out of the pool. Smth like pool is from x.x.x.50-100, framed ip is x.x.x.33. If not - tunnel group and group policy config would be good to see.

Andrew