Hi All,
I am still fairly fresh configuring VPN's. And i am just after some advice on whether the below is possible.
Essentially i want to see if there is a way to split traffic to multiple tunnels. I have an ASA5506 in a different country that i need to configure to have multiple tunnels to different offices and also ensure all traffic is routed correctly.
i have an IP range of 10.0.0.0/8 and within that i have other offices broken down by subnet.
i'd like to create 4 tunnels.
1 goes to 10.7.0.0/23
another to 10.8.0.0/23
another to 10.9.0.0/23
and the rest goes to 10.0.0.0/8
is it possible to have rules that break off different traffic and at the end sends the rest of the traffic down a tunnel?
