Hello,
I am seeing some weirdness with syslog messages not being generated for AnyConnect logins. I have a pair of ASA 5525s at my production site that I use AnyConnect with, and is working well. I am using %ASA-6-113039 to track logins to VPN using AnyConnect. I dump all of my logs to a centralized syslog server, and can generate a report of VPN logins by querying that message ID.
I have deployed a pair of 5515s at my DR site, and am looking to gain the same functionality of generating message 113039 when an AnyConnect session is established. The problem is, my syslog server and my local log buffer is not showing a message 113039. It's almost as if the message isn't being generated by the ASA.
Hoping this is something simple that I just overlooked. Relevant configuration is below:
DRASA# sh ver
Cisco Adaptive Security Appliance Software Version 8.6(1)2
DRASA# sh run log
logging enable
logging timestamp
logging buffer-size 66000
logging buffered informational
logging trap informational
logging asdm informational
logging host management 10.10.10.50
PRODASA# sh ver
Cisco Adaptive Security Appliance Software Version 8.6(1)2
PRODASA# sh run log
logging enable
logging timestamp
logging buffer-size 66000
logging buffered informational
logging trap informational
logging asdm informational
logging host inside 10.10.10.50
