Remote Access VPN problem

[mindorewala]

I have configured Remote Access VPN, which is terminated at PIX outisde interface.

Our remote clients can easily connect and access the servers on the inside network.

But they cannot connect to the servers which are in the DMZ.

Can u pls. guide me what could be wrong in the attached config and how can we resolve.

Regards,

Mustafa SFI

[pkapoor]

Your configuration does not look right to me Mustafa. Are you trying to terminate VPN software clients to the PIX? If yes, then there is part of your configuration missing (as per what has been uploaded here).

Use this link:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml