Porting rules from Ironport S370 to S380

[kbyrd]

I am moving web filtering functions from an old S370 WSA to an new S380 WSA.

Is it possible to backup the current rule set from the S370 and restore it to the S380?

[Ken Stieers]

Yes, if they are running the same version of the code.

If not, you'll have limited success...

[kbyrd]

Ken, thanks much for your response.

The S370 is running 7.5.2-304 and the S380 is running 8.0.6-119.

I was able to do a simple saveconfig (S370) and loadconfig (S380) for the users section only and it appears to work. Could I not do the same thing for the <wga_config> thru </wga_config> section?

[Ken Stieers · Accepted solution]

You can try it, but no promises that it will work.

There were a large number of changes with category in the 7.x line (I can't remember when they got them lined up between CWS and WSA), which may cause you some headaches.

Ken

[kbyrd]

OK, I'll see if we can upgrade the S370 to 8.0.6-119 and then try it.

Thanks, Ken.