Adding a device to the ACS server

[TCC_2]

Core Issue

Adding a device to the ACS server.

Resolution

Follow these instructions to add an access point (AP) to an Access Control Server (ACS):

1. From the ACS main menu, click on the Network Configuration button.
2. Click on the Add Entry button.
3. Configure the Domain Name System (DNS) name of the AP, the IP address of the AP, the Remote   Authentication Dial-In User Service (RADIUS) shared secret and the authentication method.
4. Be sure to select RADIUS (Cisco Aironet) in the Authenticate Using drop down menu.
5. To complete, click the Submit + Restart button.

Problem Type

Install

Hardware issues

Products

Access point

BR 350