RADIUS servers that support LEAP include the following:
Cisco Secure ACS version 2.6 and later
Cisco Access Registrar version 1.7 and later
Funk Software's Steel-Belted RADIUS version 3.0 and later
Before implementing a LEAP solution, network administrators are advised to review the 802.11 Wireless LAN Security White Paper. Special attention should be paid to the use of strong passwords. Cisco LEAP is a password-based algorithm. To minimize the possibility of a successful dictionary attack, use strong passwords, which are difficult to guess. Some characteristics of strong passwords include the following:
A minimum of ten characters.
A mixture of uppercase and lowercase letters.
At least one numeric character or one non-alphanumeric character (example: !#@$%).
No form of the user's name or user ID.
A word that is not found in the dictionary (domestic or foreign).
Release notes / product overview / data sheet / FAQ
I have AP3702 (IW3702-4E-M-K9) configured as WGB and connected to same model infrastructure Access Point on 5GHz.Randomly, the WGB get disconnected from the infrastructure Access Point and doesn't connect automatically.I have to reboot the WGB or shut/no ...
A large metropolitan organization has an existing enterprise wide WIFI network consisting of roughly ten WLCs 5508-5520 and 8540s with over 2000 access points(2800 class). The same organization has a separate secure network with applications j...
Hi guys, is it possible use wlc 9800-CL release 17.4.1 as dhcp server for ssid in remote branch localyys witched?I cannot use SVI ip address because:1) SSID are locally switched2)same ssid are replicated in several branch office with local subn...
Hello Wireless experts,I want a very simple configuration as I have it with AireOS today:Requirement 1: Rate limit a SSID to a certain value (example 10 Mbit/s)=> So the aggregate traffic to and from the SSID must not exceed the limit for all clie...