Resolution
To enable all ports, enter these commands in configuration mode:
- Configuration mode
- port adminmode all enable
- network webmode enable
- network secureweb enable
The port adminmode command enables Web Graphical User Interface (GUI) access on all of the ports on the controller. The network mode enable command also allows HTTP access (in addition to HTTPS, if configured).
To enable secure web mode (HTTP), issue the network secureweb enable command. After every command is issued, reboot the controller for the changes to take effect.
Problem Type
Cannot console or telnet or GUI into a device
Products
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
Device Access Method
GUI Interface