el 04-15-2011 09:47 AM
Tengo una controladora de modulo en un router 2800 con la version 6.0.202.0 y no he podido actulizar a la version 7.0.98.0 o 7.0.218, cuanto termina de pasar el archivo del tftp y empieza a extraerlo se reinicia el puro modulo de repente. Ya le probe via web y por medio CLI y hace lo mismo, en el CLI muestra lo siguiente:
TFTP Code transfer starting.
TFTP receive complete... extracting components.
***** send signal 15 to 242 (info/pid = 1) *****
[<c0103785>] dump_stack+0x15/0x20 (12)
[<c01200a7>] send_signal+0xd7/0x1a0 (44)
[<c01201d1>] specific_send_sig_info+0x61/0xe0 (28)
[<c01202bc>] force_sig_info+0x6c/0xa0 (24)
[<c0133400>] oom_kill_task+0x20/0x30 (16)
[<c013343d>] oom_kill+0x2d/0xf0 (24)
[<c013358f>] out_of_memory+0x8f/0xe0 (16)
[<c013bd20>] try_to_free_pages+0x190/0x1a0 (68)
[<c01343c0>] __alloc_pages+0x210/0x2f0 (52)
[<c01344bb>] __get_free_pages+0x1b/0x40 (8)
[<c015eccc>] __pollwait+0x6c/0xa0 (24)
[<c022e9e7>] datagram_poll+0xd7/0x100 (24)
[<c02289e5>] sock_poll+0x15/0x20 (12)
[<c015ef98>] do_select+0x1a8/0x2f0 (124)
[<c015f353>] sys_select+0x243/0x480 (104)
[<c0102297>] syscall_call+0x7/0xb (-8124)
Terminated
Les agradezco el apoyo.
Saludos.
¡Resuelto! Ir a solución.
el 08-03-2011 01:07 AM
Hola
La NM-WLC no soporta la versión 7.0. Unicamente las NME-AIR-WLC pueden ser actualizadas a la 7.0.
Saludos
el 04-20-2011 04:21 AM
Hola Milton, chequeando en la pagina de soporte de cisco, documentan que los posibles errores son:
During the upgrade process, you can come across some errors that affect the upgrade process. This section explains what the error messages mean and how to eliminate the errors and upgrade the controller.
Code file transfer failed-No reply from the TFTP server—You receive this error message if the TFTP server is not active. Check to determine if the TFTP service is enabled on the server.
Code file transfer failed - Error from server: File was not found. Aborting transfer—You receive this error message if the OS file is not present in the default directory of the TFTP server. In order to eliminate this error, copy the image file to the default directory on the TFTP server.
TFTP Failure while storing in flash!—You receive this error when there is a problem with the TFTP server. Some TFTP servers have a limitation on the size of the files that you can transfer. Use a different TFTP server utility. There are many free TFTP server utilities that are available. Cisco recommends use of the Tftpd32 version 2.0 TFTP server. Refer to Tftpd32 in order to download this TFTP server.
The install partitions are destroyed or the image is corrupted—If you are still unsuccessful after an attempt to upgrade the software, there is a possibility that your image is corrupted. Contact Cisco Technical Support for assistance.
Refer to Upgrading the Cisco WLAN Controller Module Software for more information on how to upgrade the firmware on the WLCM.
No se como tengas la conexion al TFTP Server mi recomendacion es validarte de que la conexion al TFTP server desde el router (NM-WLC) sea lo mas cercana posible, que no poseas filtros de seguridad como ACL´s y otro detalle importante es el Firmware, validarte si esta correcta, no vaya a ser que la misma este corrupta y por eso te aborte el proceso de carga.
Si necesitas que te bajen otro firware postea por acá cual version a ver si alguno puede descargarte con su CCO incluyendome.
Salu2!
El paper esta el siguiente URL: http://www.cisco.com/en/US/partner/products/hw/modules/ps2797/products_tech_note09186a0080811085.shtml#c13
el 04-20-2011 07:50 AM
Hola Edgar,
Muchas gracias por el comentario, si he tratado de seguir tus recomendaciones de estar lo mas cerca al router conectado, utilizo el mismo programa tftpd32, de hecho con ese actualizo cualquier equipo cisco, y tambien he bajando todas las versiones de la 7.0, pero igual dega sigo haciendo unas pruebas haber si me deja.
Saludos y muchas gracias,
Milton Tizoc.
el 04-20-2011 08:07 AM
Hola Milton!
Yo igual no uso el tfpt de cisco me agrada mas el tftp de 3com, es gratis!
Salu2!
el 08-03-2011 01:07 AM
Hola
La NM-WLC no soporta la versión 7.0. Unicamente las NME-AIR-WLC pueden ser actualizadas a la 7.0.
Saludos
el 08-05-2011 03:14 PM
Hola Javier, tienes toda la razon, no me habia percatado de esa nota en el release.
Muchas gracias.
Saludos.
el 08-07-2011 04:41 PM
I don't understand Spanish but if this is NM-AIR-WLC then you can't go beyond 4.2.209.0.
See CSCto53822.
el 08-10-2011 06:59 AM
Hi leolaohoo, Thanks for your reply, i had not seen that Bug, in fact i was working fine with version 6.0, the problem was only to upgrade to version 7.0 and i didn't see in the realese of the version 7 says it does not support NM only NME that´s the point i couldn't do it.
Regards.
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad