Hola, quiero unir un nuevo ap 2802I -A-K9 a mi controlador y no puedo, el controlador el cual tengo con AP AP CAP1602I-A-K9 y AIR-CAP2602I-A-K9 unidos sin problema.
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.133.0
RTOS Version..................................... 8.0.133.0
Bootloader Version............................... 8.1.102.0
Emergency Image Version.......................... 8.1.102.0
Build Type....................................... DATA + WPS
System Name...................................... Controller-wifi
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
IP Address....................................... 10.0.19.10
IPv6 Address..................................... ::
System Up Time................................... 453 days 22 hrs 58 mins 30 secs
System Timezone Location......................... (GMT -3:00) Buenos Aires (Agentina)
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... AR - Argentina
--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 4
Number of Active Clients......................... 68
Burned-in MAC Address............................ 00:50:56:A2:43:1A
Maximum number of APs supported.................. 200
System Nas-Id.................................... Controller-wifi
WLC MIC Certificate Types........................ SHA1
Me conecte al AP por cable de consola y me aparece esta info
[*12/03/2020 15:38:22.4242] CAPWAP State: Discovery
[*12/03/2020 15:38:22.4255] Discovery Request sent to 10.0.19.10, discovery type STATIC_CONFIG(1)
[*12/03/2020 15:38:22.6193] Discovery Request sent to 10.0.19.10, discovery type STATIC_CONFIG(1)
[*12/03/2020 15:38:22.6202] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*12/03/2020 15:38:22.6203] Discovery Response from 10.0.19.10
[*12/03/2020 15:38:23.0000] This AP model is supported by controller version new er than 8.2.102.2!
[*12/03/2020 15:38:23.0000] Discovery response from MWAR 'Controller-wifi'running version 8.0.133.0 is rejected.
[*12/03/2020 15:38:23.0001] Failed to decode discovery response.
[*12/03/2020 15:38:23.0001] CAPWAP SM handler: Failed to process message type 2 state 2.
[*12/03/2020 15:38:23.0001] Failed to handle capwap control message from controller - status 4
[*12/03/2020 15:38:23.0001] Failed to process unencrypted capwap packet 0x1727000 from 10.0.19.10
[*12/03/2020 15:38:23.0001] Failed to send capwap message 0 to the state machine. Packet already freed.
[*12/03/2020 15:38:23.0001] IPv4 wtpProcessPacketFromSocket returned 4
Tengo que actualizar el controlador al parecer, si lo actualizo pierdo las licencias? los equipos AP actualmente funcionado hay que volverlos a registrar?, hay una guía paso a paso de como actualizar el controlador.
adjunto licencia
(Cisco Controller) >show license summary
License Store: Primary License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Inactive
License Count: 5 / 0 (Active/In-use)
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 1 Feature: wlc-virtual Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: 1 /1 (Active/In-use)
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 2 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: 30 /30 (Active/In-use)
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Evaluation
Saludos
