el 06-18-2013 08:41 AM
Hi
I have WLC 2504
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... WLC-2504
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +28 C
External Temperature............................. +31 C
Fan Status....................................... 4100 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0
Maximum number of APs supported.................. 15
Curretnly I am on 7.0.220.0(MD) should I upgrade to 7.3.112.0(ED) ?
I woud like to downgrade my Autonomus Access Point 1130 to lightweight mode:
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
System image file is "flash:/c1130-k9w7-mx.124-21a.JA1/c1130-k9w7-mx.124-21a.JA1"
cisco AIR-AP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
Top Assembly Part Number : 800-29230-02
Top Revision Number : A0
Product/Model Number : AIR-AP1131AG-A-K9
Configuration register is 0xF
I see two releases [WIRELESS LAN LWAPP c1130-k9w8-tar.124-25e.JAL2.tar] and [WIRELESS LAN LWAPP RECOVERY c1130-rcvk9w8-tar.124-25e.JAL2.tar] which I should use to swap IOS to LWAPP?
Thank You,
el 06-18-2013 09:54 AM
Alot of people have found stability in 7.0.X code. Otherwise, go-ahead and upgrade to 7.3.X.
el 07-02-2013 07:59 PM
Hi
I would recommend you to stay on the 7.0.x train as it is more stable, unless you want to use the new features of 7.3, otherwise you can upgrade to 7.0.240.0.
Now, for the AP1130, I recommend you to use the recovery image, which is the second you mentioned above:
c1130-rcvk9w8-tar.124-25e.JAL2.tar
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad