WLC 9800 Captive Portal

[Electronic20]

Hi Community,

Could you share with me an instruction to configure a WLC captive portal without an external server, to generate dynamic and temporary users.

Waiting for your kind help

[Wilferson Cabreja Del Rosario]

In this link you can find information about that.

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/216121-custom-web-authentication-on-catalyst-98.html

[Daniel Ordóñez Flores]

Hi @Electronic20 

You need to red Local Web Authentication (LWA) document, it will explain step by step how to configure on your 9800.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/web-authentication/b-configuring-web-based-authentication-on-cisco-catalyst-9800-series-controllers/m-local-web-authentication-configuration.html

[Electronic20]

Hi @Daniel Ordóñez Flores 

Is there an option to create local accounts but that have a certain active time? That is, it is active between 8 a.m. and 8 a.m. until 6 pm. on Monday, in the captive portal of the same WLC 9800