Best practices for device configuration using NetconfService
I've seen different approaches to device configuration using NetconfService. It has a number of methods but I don't see those used in the examples that I've seen.
What is the best way to do device configuration with NetconfService? i.e. is edit_config() just enough or should I use validate(), lock(), commit(), unlock() etc. And in what order should I use these methods?
Also is the best way to use Datastore.running or Datastore.candidate for configuration?
Difference between USGMII and USXGMII:
USGMII is used for 8x10M/100M/1GE network ports, with each port maximum speed of 1GE. USXGMII-Single Port version can be used to support ONE network port with 10M/100M/1G/2.5G/5G/10G data rates
USGMII is used...
Hi, how to execute linux-commands (which are executeable directly in the guestshell) from IOS-XE sample :[guestshell@guestshell ~]$ cat test.txt | grep SmartSmart Licensing Status: Smart Licensing is DISABLED[guestshell@guestshell ~]$ exit ...
Hi Everybody! I am trying to get the configuration from a nexus 9000v virtualized in my home lab, I am always getting this error. Exception has occurred: RPCError
File "C:\4_4 Modernizing_Netwo...