Catalyst6500シリーズスイッチで、各モジュールで実行されるダイアグ試験や、そのダイアグ試験がどの様な特徴をもっているかという事は、以下のコマンドで確認できます。
show diagnostic content module <module_number>
各試験項目のAttributeの説明は、"Diagnostics test suite attributes:"で分かる様になっています。
AttributeがDとなっている試験は、実行するとトラフィックに影響がありますので、ご注意下さい。
以下は、上記のコマンドをmodule 1に対して実行した出力例です。
Switch#show diagnostic content module 1
Module 1: CEF720 16 port 10GE
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Power-down line cards and need reload supervisor / NA
K/* - Require resetting the line card after the test has completed / NA
T/* - Shut down all ports and need reload supervisor / NA
Test Interval Thre-
ID Test Name Attributes day hh:mm:ss.ms shold
==== ================================== ============ =============== =====
1) TestOBFL ------------------------> M**N****I*** 000 00:00:15.00 10
2) TestTransceiverIntegrity --------> **PD*X**I*** not configured n/a
3) TestNonDisruptiveLoopback -------> **PN****A*** 000 00:00:10.00 10
4) TestLoopback --------------------> M*PD*X**I*** not configured n/a
5) TestScratchRegister -------------> ***N****A*** 000 00:00:30.00 5
6) TestSynchedFabChannel -----------> ***N****A*** 000 00:00:02.00 6
7) TestNewIndexLearn ---------------> C**D*X**I*** not configured n/a
8) TestDontConditionalLearn --------> C**D*X**I*** not configured n/a
9) TestCapture ---------------------> C**D*X**I*** not configured n/a
10) TestTrap ------------------------> C**D*X**I*** not configured n/a
11) TestMacNotification -------------> M**N****A*** 000 00:00:15.00 10
12) TestFibDevices ------------------> M**D*X**I*** not configured n/a
13) TestIPv4FibShortcut -------------> M**D*X**I*** not configured n/a
14) TestIPv6FibShortcut -------------> M**D*X**I*** not configured n/a
15) TestNATFibShortcut --------------> M**D*X**I*** not configured n/a
16) TestMPLSFibShortcut -------------> M**D*X**I*** not configured n/a
17) TestL3Capture -------------------> C**D*X**I*** not configured n/a
18) TestL3VlanMet -------------------> M**D*X**I*** not configured n/a
19) TestIngressSpan -----------------> M**D*X**I*** not configured n/a
20) TestEgressSpan ------------------> M**D*X**I*** not configured n/a
21) TestAclPermit -------------------> M**D*X**I*** not configured n/a
22) TestAclDeny ---------------------> M**D*X**I*** not configured n/a
23) TestQos -------------------------> M**D*X**I*** not configured n/a
24) TestNetflowShortcut -------------> M**D*X**I*** not configured n/a
25) TestFibTcamSSRAM ----------------> ***D*X**I*K* not configured n/a
26) TestAsicMemory ------------------> ***D*X**I*K* not configured n/a
27) TestEobcStressPing --------------> ***D*X**I*** not configured n/a
28) TestFirmwareDiagStatus ----------> M**N****I*** 000 00:00:15.00 10
29) TestAsicSync --------------------> ***N****A*** 000 00:00:15.00 10
30) TestUnusedPortLoopback ----------> **PN****A*** 000 00:01:00.00 10
31) TestErrorCounterMonitor ---------> ***N****A*** 000 00:00:30.00 10
32) TestPortTxMonitoring ------------> **PN****A*** 000 00:01:15.00 5
33) TestLtlFpoeMemoryConsistency ----> ***N****A*** 000 00:00:15.00 1
34) TestRwEngineOverSubscription ----> ***N****I*** 000 00:00:01.00 10
35) TestEARLInternalTables ----------> ***N****A*** 000 00:05:00.00 1
Switch#
