取消
显示结果 
搜索替代 
您的意思是: 
cancel
5135
查看次数
0
有帮助
3
回复

停电来电后交换机端口亮黄灯

Yuki4
Beginner
Beginner

我这分机房4507的交换机,每次市电停电,来电后交换机就有两个光口亮黄灯。重新把光模块拔出来重新插上就好了,每次都得去现场插拔很麻烦
更换过光模块和端口,还是有这样的情况。不是每次都出现(5次有3次),有没有遇到过这种情况的,分享下解决办法
交换机日志
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.2(1)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 27-Aug-13 12:44 by prod_rel_team
*Dec 22 21:10:24.439: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Dec 22 21:10:24.631: %SNMP-5-COLDSTART: SNMP agent on host WHC-ASW-C4503 is undergoing a cold start
*Dec 22 21:10:33.687: %C4K_TRANSCEIVERMAN-3-SEEPROMREADFAILED: Failed to read transceiver serial eeprom on port Gi2/1, try reinserting
*Dec 22 21:10:40.167: CDP-EV: RCVD CDP packet on GigabitEthernet2/2 with len (152)
*Dec 22 21:10:40.167: CDP Packet Process DONE
*Dec 22 21:10:48.539: %C4K_TRANSCEIVERMAN-3-SEEPROMREADFAILED: Failed to read transceiver serial eeprom on port Gi2/4, try reinserting
Dec 23 05:55:02.201: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=2 Port=1: Transceiver has been inserted
Dec 23 05:55:27.202: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=2 Port=4: Transceiver has been inserted
3 条回复3

ilay
VIP Collaborator VIP Collaborator
VIP Collaborator
可以尝试一下命令重启单个板卡试试,之前没遇到过网络设备总是掉电的:L
hw-module module # reset

述沭
Beginner
Beginner
 

CDB
Beginner
Beginner
找到了解决方法吗?
入门指南

使用上面的搜索栏输入关键字、短语或问题,搜索问题的答案。

我们希望您在这里的旅程尽可能顺利,因此这里有一些链接可以帮助您快速熟悉思科社区:







认可您的同行
快捷链接