取消
显示结果 
搜索替代 
您的意思是: 
cancel
4957
查看次数
40
有帮助
2
回复

#分享达人# C6800-16P10G 显示power down 故障处理

fortune
VIP Alumni
VIP Alumni
本帖最后由 vsop5207 于 2017-8-25 22:51 编辑
【原创文章】
故障描述: 新增C6800-16P10G到6500 交换机,show module 显示power down状态, 检查电源,电源功率是6000W 双电源,供电足够
然后检查IOS ,发现运行IOS 为15.1(2) 低于min IOS 要求,升级IOS 解决,但是这里要说很多新板卡兼容性要很注意:
Chassis supported
● Cisco Catalyst 6807-XL chassis
● Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS) and 6513-E
● Not supported in 6500 non-E Series chassis and 7600 Series Chassis
Slot requirements
● Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL chassis
● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E or 6509-V-E or chassis
● Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis
Minimum IOS software release
15.2(1)SY
2 条回复2

279659400
Level 1
Level 1
感谢分享!又学到了

jingjian
Spotlight
Spotlight
扩容的第一步就是要确认IOS版本的兼容性,哈哈。功课没做好,准备不足:lol
快捷链接