1. 6500-E支持的引擎型号
2. 6000/6500系列线卡支持的引擎以及最低的软件版本要求
3. 软件下载官方地址https://software.cisco.com/download/home ,选择型号引擎版本进行下载。如果没有权限,可以找代理商或服务商获取
1. 6500-E支持的引擎型号
2. 6000/6500系列线卡支持的引擎以及最低的软件版本要求
3. 软件下载官方地址https://software.cisco.com/download/home ,选择型号引擎版本进行下载。如果没有权限,可以找代理商或服务商获取
我现在ws-sup32-ge-3b主控可以用在6503和6504上面分别使用如下镜像文件:
6503的主控卡ws-sup32-ge-3b,使用镜像:s3223-ipservicesk9_wan-mz.122-33.SXH2a.bine
6504的主控卡ws-sup32-ge-3b,使用镜像:s3223-adventerprisek9_wan-mz.122-33.SXH6.bin
6506e的主控板卡vs-sup2t-10G,使用的镜像是:s2t54-ipservicesk9-mz.SPA.152-1.SY1a.bin
现在我有一台6506e的机框,使用ws-sup32-ge-3b主控,没有适配的镜像文件,上面三个镜像文件都无法正常加载启动。请问网盘应该选择哪个iso镜像启动或者进行什么设置?
按照第一次的文档中的描述,6506E应该是可以使用sup32的,但目前cisco的下载页面已经选不到sup32的引擎了,没办法从官方渠道获取可用的ios版本。
从google上查到hpe的一篇文章有关于6506E和sup32的问题,里面有对应的ios文件名,可以使用该文件名尝试是否能从网上其他渠道获取到该文件,然后替换ios测试一下。(https://support.hpe.com/hpesc/public/docDisplay?docId=c02621666&docLocale=en_US )
带E的是这个系列的zheng6E应该是可以使用sup32的,但目前cisco的下载页面已经选不到sup32的引擎了,没办法从官方渠道获取可用的ios版本。
可以先通过google搜索一下报错提示消息,看能否找到些答案
至于ios,刚从google上查到hpe的一篇文章有关于6506E和sup32的问题,里面有对应的ios文件名,可以使用该文件名尝试是否能从网上其他渠道获取到该文件,然后替换ios测试一下。(不确定能不能行,风险也未知)(https://support.hpe.com/hpesc/public/docDisplay?docId=c02621666&docLocale=en_US )
带E的是这个系列的增强版的机框,最好还是用新一些的引擎板,来提供更高性能的吞吐。
我测试了一个镜像:s3223-ipservicesk9_wan-mz.122-18.SXF10.bin
加载完成后出现:
rommon 9 > boot bootdisk:s3223-ipservicesk9_wan-mz.122-18.SXF10.bin
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ##################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) s3223_sp Software (s3223_sp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 03:09 by kellythw
Image text-base: 0x4023105C, data-base: 0x4158C320
MAC based EOBC installed
00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Firmware compiled 29-Jun-07 15:19 by integ Build [100]
00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
Cat6k-MSFC2A platform with 524288 Kbytes of main memory
Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image : ########################################################################################################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 03:12 by kellythw
Image text-base: 0x40101040, data-base: 0x42D491A0
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6506-E (R7000) processor (revision 1.2) with 458752K/65536K bytes of memory.
Processor board ID SAL1338YVP5
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface
57 Gigabit Ethernet/IEEE 802.3 interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
最后
Press RETURN to get started!
ware
IOS (tm) s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 03:12 by kellythw
00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Firmware compiled 29-Jun-07 15:19 by integ Build [100]
00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
00:00:08: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
00:01:18: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:27: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_sp Software (s3223_sp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 03:09 by kellythw
00:01:27: SP: Currently running ROMMON from S (Gold) region
00:01:27: %SYS-SP-6-BOOTTIME: Time taken to reboot after reload = 514 seconds
*Apr 26 23:59:07.192 UTC: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 26 23:59:07.220 UTC: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 26 23:59:07.396 UTC: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Apr 26 23:59:07.452 UTC: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
*Apr 26 23:59:07.668 UTC: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
*Apr 27 07:59:15.352 CN: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
%Software-forced reload
Breakpoint exception, CPU signal 23, PC = 0x41D0ED2C
-Traceback= 41D0ED2C 41D0CC78 41AC0488 41AC04B4 41978D84 419B7594 419AD938 419AD990 40753C34 4075491C 418AE8E0 418AE6FC 41A628D0 41A5F7F0 41A5FA0C 41D0128C
$0 : 00000000, AT : 1E020000, v0 : 44A40000, v1 : 000001D0
a0 : 45918600, a1 : 5000BAF4, a2 : 00000005, a3 : FFFFFFFC
t0 : 0000001B, t1 : 00000001, t2 : 00000039, t3 : 00000001
t4 : 5000BAA0, t5 : 00000000, t6 : 0000705C, t7 : 5000BA98
s0 : 00000000, s1 : 43010000, s2 : 44E03E34, s3 : 086CA848
s4 : 4582E0D0, s5 : 457EB1F0, s6 : 00000040, s7 : 437F0000
t8 : 5000BA74, t9 : 00000008, k0 : 00000000, k1 : 00000000
gp : 430639C0, sp : 5000BB28, s8 : 00000000, ra : 41D0CC78
EPC : 41D0ED2C, ErrorEPC : 4268A1F4, SREG : 3401F103
MDLO : CCCCCD40, MDHI : 000001CC, BadVaddr : FFBFFFFF
CacheErr : 80FEF000, DErrAddr0 : 1E02000C, DErrAddr1 : 05918600
DATA_START : 0x42D491A0
Cause 00000024 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20210426-235924
=== Flushing messages (07:59:24 CN Tue Apr 27 2021) ===
Buffered messages:
00:01:07: RP: Currently running ROMMON from S (Gold) region
*Apr 27 07:59:01.939 CN: %SYS-6-CLOCKUPDATE: System clock has been updated from 23:59:01 UTC Mon Apr 26 2021 to 07:59:01 CN Tue Apr 27 2021, configured from console by console.
*Apr 27 07:59:03.855 CN: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Apr 27 07:59:04.847 CN: %SYS-5-CONFIG_I: Configured from memory by console
*Apr 27 07:59:06.672 CN: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 03:12 by kellythw
00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Firmware compiled 29-Jun-07 15:19 by integ Build [100]
00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
00:00:08: %SYS-SP-3-LOGGER_FLUSHED: SYHH)7 07:59:26.144 CN: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Apr 27 07:59:26.144 CN: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 27 07:59:26.144 CN: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x42371cc4
PC = 0x40401bfc, SP = 0x415c13d8, RA = 0x403fc9dc
Cause Reg = 0x00001020, Status Reg = 0x34008002
rommon 10 > confreg 0x2142
不知道是什么原因
从设备启动的log上看,引擎已经是加载起来的,应该有一小段时间是一个进入特权模式进行操作的
看不到设备强制重启的原因,仅有个%Software-forced reload的提示。
crashinfo的片段看不懂。。结尾参考这个https://www.cisco.com/c/en/us/support/docs/routers/7500-series-routers/26145-crashes-swforced-troubleshoot.html 也没看出啥东西,最多也就排除几个可能
要是有服务的话还是开个case看看吧。能力有限搞不定~=_=#