服务支持讨论区

PLEASE DELETE MY ACCOUNT!!!!

https://www.cisco.com/c/en/us/td/docs/dcn/nexus3550/fdk/user-guide/cisco-nexus-3550-fdk-user-guide/exanic-fdk.html LicensingThe FDK is available in three main variants:"full": Full licensed version"eval": Time limited demonstration version that can b...

很棘手的问题，整个过程如下：两个月前，我在家里的电脑（win11）本来能正常使用的anyconnect，提示 vpn services is not available无法使用，我按论坛中的方法，重启cisco anyconnect服务（能启动成功）、重装anyconnect，改UTF -8设置，关闭ICS服务等等，论坛中能找到的都试了都没有解决，最后我重装了系统（仅重装了C盘，其他盘没有清理），暂时解决了问题，但是1周后又复发，我再次重装系统，1周后继续复发，于是我彻底重装了电脑（全部硬盘格式...

請問我能夠使用一個帳戶，在同一時段同時進入兩個會議嗎?(非主持方)

客户打开网站会提示：“此站点因存在网络钓鱼威胁而被阻止”。

Is the C9600 series switch a Layer 4 switch, or what functions are required to define a switch as a Layer 4 switch? Can the following prove that it is a Layer 4 switch or has Layer 4 switching capabilities?      

What does the VSAN supported by the Cisco Nexus 5600 series switch mean, and how many VSANs can each switch create at most?

What does the IP network module of the Cisco ASR1002 mean, and are there any related statements?

我之前使用openwrt不存在这个问题，没有ip上行是50Mbps，但是使用思科路由器配置好两个PPPoE后使用wan2做openvpn隧道，但是wan2上传数据的时候wan1的上传也会降低，变成了wan2和wan1共享上传50Mbps，感觉好像两个PPPoE在服用一个回话似的，请问有人遇到过这个情况么？interface GigabitEthernet0/0/0 no ip address negotiation auto pppoe enable group global pppoe...

Christopher ChooPlease check the attached power up video and press express button for IE3300 switch. This switch cannot boot normally. Please help to check and support. The serial number is FCW2825Y8JB. I use Putty connect and cannot go to privilege ...

公司现有Nexus平台，信息如下：  Cisco-N93360-SW4-2# sh ver Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (C) 2002-2022, Cisco and/or its affiliates. ... Software BIOS: version 05.47 NXOS: version 10.3(2) [Featur...

在meraki Doshboard上看到防火墙mx67 Unreachable状态，wan也是down的但实际网络正常，这个站点的交换机，ap状态都显示正常，能ping到wan口ip,能通过防火墙去到internet,pe和ce也都能ping通。 

This switch port is 400G, and when we plug in a 400G module, it shows 2X400G-DR4. I would like to ask if there is any command that can make the switch operating system identify whether the current port is 400G or 800G. It seems that this device recog...