在Release 15.0(1)以前可以通过输入命令show parser dump来查看思科路由器中的全部命令。
下面是输出所有interface命令的例子:
SW-1#show parser dump interface
Load for five secs: 6%/0%; one minute: 5%; five minutes: 5%
No time source, *22:29:58.899 UTC Mon Mar 29 1993
Mode Name :interface
0 exit
0 help
15 description
15 power inline port maximum Number
15 power inline port
15 power inline consumption Number
15 power inline auto max Number
15 power inline auto
15 power inline delay shutdown <0-20> initial <0-300>
15 power inline static max Number
15 power inline static
15 power inline never
15 power inline
15 power inline police action log
15 power inline police
15 location civic-location-id <1-4095>
15 location elin-location-id <1-4095>
15 location additional-location-information
...
但是这个命令在Release 15.0(1)之后被取消掉了T_T(老天爷啊,为什么要这样对我?!){:3_60:}
参考资料:https://www.cisco.com/c/en/us/td/docs/ios/fundamentals/command/reference/cf_book/cf_s3.html?dtid=osscdc000283
请问思科取消show parser dump之后有没有推出类似的命令来取代show parser dump?
或者有其他方法可以达到同样效果呢?{:3_59:}