System Bootstrap, Version 12.4(13r)T11,RELEASE SOFTWARE (fc1)
Technical Support:http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Initializing memory for ECC
..
c2811 platform with 524288 Kbytes of mainmemory
Main memory is configured to 64 bit modewith ECC enabled
Upgrade ROMMON initialized
program load complete, entry point:0x8000f000, size: 0xcb80
program load complete, entry point:0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000,size: 0x1866558
Self decompressing the image :###############################################################################################################################################[OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0003E7 0X00474800 C2811 Mainboard
0X000021B8 Onboard USB
0X002C29F0 public buffer pools
0X00211000 public particlepools
TOTAL: 0X0094A3A8
If any of the above Memory Requirements are
"UNKNOWN", you may be using anunsupported
configuration or there is a softwareproblem and
system operation may be compromised.
Rounded IOMEM up to: 10Mb.
Using 1 percent iomem. [10Mb/512Mb]
Restricted Rights Legend
Use, duplication, or disclosure by theGovernment is
subject to restrictions as set forth insubparagraph
(c) of the Commercial Computer Software -Restricted
Rights clause at FAR sec. 52.227-19 andsubparagraph
(c) (1) (ii) of the Rights in TechnicalData and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 2800 Software(C2800NM-IPBASE-M), Version 12.4(15)T10, RELEASE SOFTWARE (fc3)
Technical Support:http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems,Inc.
Compiled Mon 14-Sep-09 14:01 byprod_rel_team
Image text-base: 0x400AF970, data-base:0x419EEB40
SDRAM ECC Error,
err addr - 0xE30F642F, err data_l0x02000002,err data_h 0x00000000,
rcv ecc - 0x00000000, calc ecc 0x0A000000,err cnt 0xA2010000
r0 =FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 42F60000 r4 = 0
r5 =0 r6 = 0 r7 = 3F641020 r8 = 0 r9 = 3F6373A0
r10 = 0 r11 = 0 r12 = 0 r13 = 1000C r14 = 0
r15 = 0 r16 = 0 r17 = 18D3 r18 = 0 r19 = 0
r20 = 0 r21 = 429F0000 r22 = 0 r23 = 43140000 r24 = 0
r25 = 10010 r26 = 0 r27 = C r28 = 0 r29 = 2
r30 = 0 r31 = 1 r32 = FFFFFFFF r33 = FFFFFFFF r34 =FFFFFFFF
r35 = FFFFFFFF r36 = FFFFFFFF r37 =FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF
r40 = FFFFFFFF r41 = FFFFFFFF r42 =FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF
r45 = FFFFFFFF r46 = FFFFFFFF r47 =FFFFFFFF r48 = FFFFFFFF r49 = BEEF0000
r50 = 0 r51 = 0 r52 = 0 r53 = 3040A801 r54 = FFFFFFFF
r55 = A000F000 r56 = FFFFFFFF r57 =FFFFFFFF r58 = 0 r59 = 4410A160
r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 400BA9C4
sreg = 3400C103 mdlo_hi = 0 mdlo = 0
mdhi_hi = 0 mdhi = 0 badvaddr_hi = FFFFFFFF
badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0
epc = 419B0E7C err_epc_hi = FFFFFFFF err_epc = FFFFFFFF
%ERR-1-FATAL: Fatal error interrupt,reloading
err_stat=0x0
=== Flushing messages () ===
Queued messages:
:Interrupt exception, CPU signal 22, PC = 0x0
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback=
$0 : 00000000, AT : 00000000, v0 :00000000, v1 : 00000000
a0 : 00000000, a1 : 00000000, a2 :00000000, a3 : 00000000
t0 : 00000000, t1 : 00000000, t2 :00000000, t3 : 00000000
t4 : 00000000, t5 : 00000000, t6 :00000000, t7 : 00000000
s0 : 00000000, s1 : 00000000, s2 :00000000, s3 : 00000000
s4 : 00000000, s5 : 00000000, s6 :00000000, s7 : 00000000
t8 : 00000000, t9 : 00000000, k0 :00000000, k1 : 00000000
gp : 00000000, sp : 00000000, s8 :00000000, ra : 00000000
EPC : 00000000, ErrorEPC : 00000000, SREG : 00000000
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x419EEB40
Cause 00000000 (Code 0x0): Interruptexception
%ALIGN-1-FATAL: Illegal access to a lowaddress
addr=0x110, pc=0x402772E0 , ra=0x402772D4 ,sp=0x4408FEA8
%ALIGN-1-FATAL: Illegal access to a lowaddress
addr=0x110, pc=0x402772E0 , ra=0x402772D4 ,sp=0x4408FEA8
:TLB (store) exception, CPU signal 10, PC = 0x402772E0
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback= 0x402772E0 0x400886BC0x4008CDE4 0x400BA9C4
$0 : 00000000, AT : 42F60000, v0 :00000303, v1 : BFA00000
a0 : 00000303, a1 : 00000000, a2 :00000000, a3 : 00000005
t0 : 000F4240, t1 : 0000000B, t2 :0000000B, t3 : FFFFFFFE
t4 : 4BDE0D25, t5 : 00000000, t6 :43140000, t7 : 4BDE093B
s0 : 43141AC4, s1 : 00000006, s2 :00000000, s3 : 00000000
s4 : 4408FF20, s5 : 42F40000, s6 :BEEFBACC, s7 : 00000000
t8 : BFA00000, t9 : 00000003, k0 :00000020, k1 : 00000000
gp : 42F69CA0, sp : 4408FEA8, s8 :4410A188, ra : 402772D4
EPC : 402772E0, ErrorEPC : BFCC0E8C, SREG : 34008003
MDLO : 000003E8, MDHI : 00000000, BadVaddr : 00000110
DATA_START : 0x419EEB40
Cause 0000000C (Code 0x3): TLB (store)exception
-Traceback= 0x402772E0 0x400886BC 0x4008CDE40x400BA9C4
No warm reboot Storage
*** System received a Bus Error exception***
signal= 0xa, code= 0xc, context= 0x43145bbc
PC = 0x4008d45c, Cause = 0x20, Status Reg =0x34008002
