请问为何mmi在1941路由出错

[wxhdlt]

新入一1941路由，写以下命令出错：
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
请问1941是不是没有了mmi命令？
如没的话有什么命令代替？

[CiscoNancy · Accepted solution]

请参看官方配置文档http://www.cisco.com/c/en/us/td/docs/routers/access/1900/software/configuration/guide/Software_Configuration.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70.html