大家好:
我两台ASR9010做的集群,ASR9010是双RSP,现在control-link 是4对~
show nv edge control control-link-protocols location 0/rsP0/cpu0
Priority lPort Remote_lPort UDLD STP
======== ===== ============ ==== ========
0 0/RSP0/CPU0/0 1/RSP0/CPU0/0 UP Forwarding
1 0/RSP0/CPU0/1 1/RSP1/CPU0/1 UP Blocking
2 0/RSP1/CPU0/0 1/RSP1/CPU0/0 UP On Partner RSP
3 0/RSP1/CPU0/1 1/RSP0/CPU0/1 UP On Partner RSP
之前control-link 用的是思科的老模块GLC-LH-SM 现在想替换为GLC-LH-SMD (ASR上面已有业务在跑)
请问: 1) 换模块时,当换到 0/RSP0/CPU0/0 或者 1/RSP0/CPU0/0 时RSP会自动switchover?
2) 如果会自动的switchover,我先把另外6个换了,然后手工switchover,再换Forwarding的那个两个口可行吗?
不好意思就这个问题开Case。。所以想问问大家,谢谢~