已解决! 转到解答。
R1#show ip eigrp neighbors
EIGRP-IPv4 Neighbors for AS(650)
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
2 192.168.1.226 Et0/0 12 00:17:08 10 100 0 19
1 192.168.2.226 Et0/1 14 00:17:08 9 100 0 18
0 172.29.197.98 Se1/0 11 00:17:16 17 102 0 7
R1#show ip route eigrp
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
12.0.0.0/30 is subnetted, 1 subnets
D EX 12.1.1.0 [170/2221056] via 172.29.197.98, 00:13:54, Serial1/0
172.29.0.0/16 is variably subnetted, 3 subnets, 2 masks
D 172.29.197.100/30
[90/2195456] via 192.168.2.226, 00:15:42, Ethernet0/1
[90/2195456] via 192.168.1.226, 00:15:42, Ethernet0/0
192.12.66.0/30 is subnetted, 2 subnets
D EX 192.12.66.0 [170/2195456] via 172.29.197.98, 00:14:15, Serial1/0
D EX 192.12.66.4 [170/2221056] via 192.168.2.226, 00:13:54, Ethernet0/1
[170/2221056] via 192.168.1.226, 00:13:54, Ethernet0/0
R1#traceroute 192.12.66.1 source serial 1/0
Type escape sequence to abort.
Tracing the route to 192.12.66.1
VRF info: (vrf in name/id, vrf out name/id)
1 172.29.197.98 10 msec * 10 msec
R1#
ts1110 发表于 2019-1-23 11:11
楼上兄弟有误导,这里跟AD没有关系,R1从ASR-1哪里学到的为外部路由,从R2哪里学习的到的也是外部路由,AD ...
suzhouxiaoniu 发表于 2019-1-21 09:43
管理距离的问题,ASR-1的F0/0口对R1来说,直接从ASR-1到达,由于在不同个AS号,所以属于外部路由DEX,管理距 ...
18653465190 发表于 2019-1-23 17:07
在ASR-1和ASR-2上,写前缀列表,匹配自己发布的路由,分别把在600和650下,将自己发布路由过滤掉。
形成次 ...
ts1110 发表于 2019-1-25 12:14
这个就是一个简单的EIGRP选路问题,上次没有注意LZ环境中的带宽问题!
当前R1去往192.12.66.0/30网段有 ...