取消
显示结果 
搜索替代 
您的意思是: 
cancel
19392
查看次数
846
有帮助
18
回复

IOS-XR升级问题

Adinm
Level 11
Level 11
我升级IOS-XR,先把PIE传到Disk0的根目录下,然后再admin模式下install add disk0:XXX sy 就一直报错,但是如果是install add tftp://x.x.x.x/xxx sy就没有错,为何PIE不能从disk0里面install add,如果能再disk0里面add的,命令又是怎么样的?谢谢!
18 条回复18

Adinm
Level 11
Level 11
Rocky 发表于 2018-7-12 22:26
“disk0:asr9k-mini-px.pie-6.3.2”或者试试在disk0:后面加“/"看看

这一个我没有明白您是什么意思?我要怎么操作呢?谢谢您

Rockyw
Spotlight
Spotlight
asdm 发表于 2018-7-12 23:13
这一个我没有明白您是什么意思?我要怎么操作呢?谢谢您

“disk0:asr9k-mini-px.pie-6.3.2"变成“disk0:/asr9k-mini-px.pie-6.3.2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

Adinm
Level 11
Level 11
Rocky 发表于 2018-7-12 23:14
“disk0:asr9k-mini-px.pie-6.3.2"变成“disk0:/asr9k-mini-px.pie-6.3.2

(admin)#install activate disk0:/asr9k-mini-px.pie-6.3.2
started by user 'cisco' via CLI at 19:33:35 UTC Fri Jul 13 2018.
RP/0/RSP0/CPU0:Jul 13 19:33:35.999 : instdir[254]: %INSTALL-INSTMGR-3-INSTALL_OPERATION_USER_ERROR : User error occurred during install operation 47. See 'show install log 47 detail' for more information.
Error: Cannot activate the following package because it could not be found:
Error: disk0:asr9k-mini-px.pie-6.3.2
Error: Suggested steps to resolve this:
Error: - check the name of the package being activated.
Error: - check the set of inactive packages using '(admin) show install
Error: inactive'.
Error: - add the missing packages to the router, if not present, using
Error: '(admin) install add'.
Error: Cannot proceed with the activation as there are no packages to
Error: activate
Error: Suggested steps to resolve this:
Error: - check the names of the packages being activated.
Install operation 47 failed at 19:33:36 UTC Fri Jul 13 2018.

Adinm
Level 11
Level 11
我认为IOS-XR系统升级,不能把mini等文件直接传送到disk0目录,应该传到其他目录,比如disk1:,然后再使用install add命令解压到disk0目录,一直在disk0解压是导致升级不成功的原因
快捷链接