In BGP, There were lots of logs about TCAM at the N9K in 30mins.

[thehyuns]

N9508_1 %IPFIB-SLOT2-2-UFIB_ROUTE_CREATE: Unicast route create failed for INS unit 0, VRF: 1. 193.227.10.0/24, flags:0x0, intf.0xd0019, Error: FIB TCAM FULL For IP Routes(235)

What causes the above log to occur?
Under what conditions does it occur?
What is the solution?

[MHM Cisco World]

The bgp is large' and if you receive full bgp table then sure tcam can not handle it.

Try filter prefix you receive from bgp peer.

MHM