ACI - Callhome - How to monitor MCP Fault

[ju.mahieu]

Hi team,

I'm trying to monitor the two faults F2534 and F2533 related to MCP loop detection.

As explained in the following links, I tried to modify my monitoring policy to add these two faults.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/b_IFC_Faults_Errors_chapter_01.html#Cisco_Task_in_List_GUI.dita_24982ed6-d497-4c9f-88f6-bcd5c25a4409

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/b_IFC_Faults_Errors_chapter_01.html#id_64984

Unfortunately, I didn't find which "monitoring object" I have to choose.

Any ideas ?

Thank you

Ju

[ju.mahieu · Accepted solution]

Hi,

The class I was looking for is "mcp.if" located in Fabric Policies

Ju

[AshSe]

Cisco ACI Callhome Configuration guide

HTH