03-28-2019 02:31 AM
APIC Version : 3.0.2n
Hi,
My use case is quite simple but I don't know really how to do that.
I would like to display a "fault" if CRC or Input Error are detected on any physical interfaces.
The "Monitoring Policies" seems to be the good way but I need your advice to configure it properly.
Thank you.
Regards,
Ju
05-28-2021 01:03 AM
you've probably already found it but for anyone that is reading this post, you can view them in the GUI or via CLI..
05-29-2021 11:43 AM
You can configure the threshold under the default Monitoring policy under Fabric Policies -> Monitoring -> default -> Stats Collection Policies.
Select Monitoring Object "Layer 1 Physical Interface Configuration (l1.PhysIf) and choose Ingress Drop Packers from the Stats Type dropdown
Click on the + button to configure thresholds and edit threshold for Ingress Error Drop Packets rate. You can set your custom values here.
- Rising Thresholds —Triggered when the value exceeds the threshold
- Falling Thresholds —Triggered when the value drops below the threshold.
- The set value specifies when a fault is triggered; the reset value specifies when the fault is cleared.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide